The shifting weather in Wisconsin Rapids can mean a number of things, from the changing color of leaves to turning on your furnace for the cooler months. Of course, total home comfort is your year-round goal, but sometimes our heating and cooling equipment doesn’t feel like helping us out. That doesn’t mean that you’re automatically destined for furnace repair though.
When your furnace quits working or you notice it acting weirdly, there are four things you can check on before calling in the experts at Rapids Sheet Metal Works Inc for furnace repair. Here are a few troubleshooting tips to try before giving us a shout.
1) Check your thermostat
This is one of the easiest checks that homeowners can do on their own, and might solve the problem more than they’d like to admit. Make sure your thermostat is:
- Set to “heat”
- Programmed higher than the room temperature
- Using a fresh battery
2) Look at the furnace filter
Dirty filters can cause furnaces to act out of the ordinary, making them shut down without notice and without making a peep. Furnace filters have been the cause for many furnace repair calls in the past, but there’s no reason to pick up the phone when you can swap it out yourself. Not to mention that a dirty furnace filter diminishes your system’s efficiency and reduces airflow.
3) Find and inspect your furnace’s switches
Nearly all of the time, switches to your furnace are found:
- Close to the furnace and usually look like your everyday light switch.
- At your circuit breaker panel. Identify the breaker that controls your furnace and figure out if it is in the middle position or the Off position. If it is, cycle the breaker to Off and then re-set it back to the On position.
4) Open all of your vents
A typical mistake among homeowners is to close vents in unoccupied rooms, but this might actually lead to a need for furnace repair. Closing these vents can potentially cause your system to be less efficient and stop working because of added airflow pressure.
If you’ve tried these four troubleshooting tips and still aren’t having any luck getting your system back operating, it’s probably time to give us a call. The experts at Rapids Sheet Metal Works Inc in Wisconsin Rapids are here to ensure all of your furnace repair needs are met, so give us a call at 715-301-0256.