Take These Simple Steps to Get the Most out of Your Homes Energy Efficiency

April 20, 2017

 

Regularly having your HVAC system cleaned and tuned up could elevate its performance and help lower your energy costs because an HVAC system that’s taken care of can use much less energy than a system that is not. But what else should you do? Here are more manageable steps you can do to increase your Wisconsin Rapids home’s energy efficiency.
  1. Seal all leaks around your windows and doors. Add caulk or weatherstripping in the spots you detect leaks.
  2. Insulate your walls and attic. You likely equate insulation with keeping your house warm throughout the winter, but it also provides benefits in the summer. When it’s hot outside, heat is constantly seeking cooler places—like your home. Ensure you have adequate insulation to keep the heat from moving through your attic and walls and decreasing your home comfort.
  3. Have your ducts cleaned. Clean ducts make it easier for air to flow through your home, which makes your air conditioner’s job easier.
  4. While you’re at it, confirm your ducts are properly sealed to prevent air leaks and insulate them if needed. If the ducts are leaking, that means you are losing valuable heated or cooled air. Properly sealing and insulating ducts is even more important if they are located in the attic, a vented crawlspace or any other unconditioned area.
  5. Set your thermostat as high as comfortably possible in the summer. To help possibly keep your cooling bill lower, keep the difference between the indoor and outdoor temperatures as small as possible. According to the Department of Energy, you can save nearly 10% a year on heating and cooling by simply turning your thermostat back 7° to 10°F from its usual setting for 8 hours a day. If you turn on a ceiling fan in conjunction with your air conditioner, you can raise your thermostat setting by about 4°F without negatively affecting your comfort.
  6. Install a programmable thermostat. Sure, thermostats can be adjusted physically, but programmable thermostats make managing your home comfort and efficiency much easier. You can automatically modify your temperature when you’re away from home or when you’re sleeping while avoiding discomfort because your home’s temperature will return to normal before you come home or wake up.
  7. If you choose not to use a programmable thermostat, avoid setting your thermostat at a colder-than-usual setting when you turn on your air conditioner. Your house won’t cool down any faster and will only cost you more money in energy.
  8. Don’t place lamps, TV sets or other heat-generating appliances near your thermostat. This practice can make your air conditioner to run longer than needed because your thermostat senses heat from these appliances and thinks your home needs cooled.
  9. [Use|Utilize|Take advantage of]54] your windows. If it’s cooler at night, turn off your AC and open the windows. Shut the windows and your curtains or blinds in the morning to trap the cooler air and to hinder heat gain through the windows.
  10. Invest in new, energy-efficient equipment. If your HVAC equipment is more than 10 years old or not keeping up with your home-comfort needs, call Rapids Sheet Metal Works Inc for an evaluation. It may be time to replace it with ENERGY STAR®-qualified equipment that can reduce your annual energy bill by more than $115, according to energystar.gov.

If you’ve got additional questions about how to enhance your home’s energy efficiency, think it could be time for more energy-efficient equipment or simply want to schedule a regular maintenance appointment, call Rapids Sheet Metal Works Inc at 715-301-0256 and our experts will help.